Русская версия
  • Country*:
  • Name*:
  • Company*:
  • E-mail*:
  • Confirm your e-mail*:
  • Phone number:
  • Message*:

* - Required

Send

Leaf Spring Hole ID Measurement Machine

The machine is designed for contactless scanning and geometrical parameters measurement of the leaf springs holes.
 

Get PricingInquires
Models
  • RF096-30/75-120

    RF096-30/75-120

    Measurement range, mm : 30...75
    Hole depth, mm: up to 120
    Accuracy, mm: ±0.05
    Measurement speed, parts/s programmable,
    depending on depth
    See detailed specifications →
Specifications

Leaf Spring Hole Inner Diameter Measurement Machine

Name of parameter Value
Measured diameters, mm 30...75
ID measurement accuracy, um ±0.04
Angle scan resolution, points for turnover 3200
Hole depth measurement range, mm 120
Linear translation accuracy, mm ±0.05
Linear translation resolution, mm programmable, from 0.02
Laser sensor linearity, um ±20
Laser sensor resolution, um 5
Laser sensor sample frequency, kHz 10
Laser sensor power, mW 1
Laser safety Class 2 (IEC60825-1)
Interface Ethernet
Power supply, V 220
Measurement speed, parts/s programmable, depending on depth
Weight (without cables) 11000 gram
Measured parameters average ID, min and max ID, roundness, conicity, cilindricity
Operation

Operation of the machine is based on the scanning of the item inner hole surface by rotating point triangulation laser sensor.

The machine includes a base on which installed a table with the V-block and fixing screw (for placing the measured spring), linear translation mechanism, controller. The linear translation mechanism carries the rotation module on which the laser sensor installed. On
the back side of the machine there are two connectors for power and interface.
 

Figure 1. Front view Figure 2. Side view
Figure 3. View from above

The machine operates as follows.
The measured spring is placed on the table and fixed in the V-block by screw. At the command from the operator, a laser sensor begins rotation and moves into the control
hole. During rotation a laser sensor measures the distance to the surface of the hole in synchronization with the angle of rotation. The depth of control and number of measured cross sections inside the hole is defined by the software. Radial coordinates of the hole surface are transmitted to the computer for calculating the required hole geometric parameters.

Video

Leaf Spring Hole Inner Diameter Measurement Machine

Order info

Order information for Inner Diameter Measurement Machine

RF096-Dmin/Dmax-L


Symbol Description
Dmin/Dmax ID measurement range, mm
L Hole depth, mm

Search

 

Site sections

More links

© 2001 – 2018 RIFTEK LLC

Logoisky tract, 22, Minsk, Republic of Belarus

Tel/fax:  +375 (17) 281-35-13
              +375 (17) 281-36- 57

Mobile:   +375 (29) 655-72-55

E-mail: info@riftek.com

Our partners in other countries

  • Country*:
  • Name*:
  • Company*:
  • E-mail*:
  • Confirm your e-mail*:
  • Phone number:
  • Message*:

* - Required

Send