Triangulation Laser Sensor, RF602 Series
The main features of the sensors:
| RF602- | 20/10 | 20/25 | 30/50 | 50/100 | 65/250 | 105/500 | |
| Base distance X, mm | 20 | 20 | 30 | 50 | 65 | 105 | |
| Measurement range, mm | 10 | 25 | 50 | 100 | 250 | 500 | |
| Linearity, % | ±0,05 of the range | ±0,1 | |||||
| Resolution, % | 0,01 of the range | 0,02 | |||||
| Temperature drift | 0,02% of the range/°С | ||||||
| Max. sampling frequency, Hz | 9400 | ||||||
| Light source |
red semiconductor laser, 660 nm wavelength or UV semiconductor laser 405 nm wavelength (BLUE version) |
||||||
| Output power, mW | ≤0,95 mW | ||||||
| Laser safety Class | 2 (IEC60825-1) | ||||||
| Output interface: | |||||||
| digital | RS232 (max. 460,8 kbit/s) or RS485 (max. 460,8 kbit/s) | ||||||
| analog | 4…20 mA (≤ 500 Ω load) or 0…10 V | ||||||
We have also expanded the possibilities of communication with all Triangulation Sensors RF60x Series. Namely, now you can communicate with sensors through
- Modbus RTU protocol and
- CANopen protocol
and can use our
- standard binary format data or
- ASCII format.
Besides of that we have implemented
- new type of sensors mutual synchronization. Such synchronization is very useful for thickness measurements and other type of multi-coordinate systems,
- encoder inputs (AL and IN lines mode) for working with quadrature signals from encoders.
All these new functions are controlled by new service software and are available for sensors with S/N from 23500. You can also upgrade old sensors' firmware.
Apart from that the above mentioned changes are described in Manual for RF602 sensor and Manual for RF603. Upgraded Manuals for other models from RF60x Series will be available soon.