Русская версия
  • Country*:
  • Name*:
  • Company*:
  • E-mail*:
  • Confirm your e-mail*:
  • Phone number:
  • Message*:

* - Required

Send

3D Laser system for large diameter pipes measurement

The system is designed for non-contact measurement of geometrical parameters (diameter, roundness, curvature) of large diameter pipes.
Technical characteristics of the system can be changed for a specific task.

Get PricingInquires
Models
  • 3D Laser system for large diameter pipes measurement  MRT1420-RF1420TB

    3D Laser system for large diameter pipes measurement MRT1420-RF1420TB

     

    Pipes nominal diameter, mm 450...1525
    Measurement accuracy, mm  ±0,15
    Pipe length, m  9...18,5
    Throughput, pipes/hours 25
    See detailed specifications →
Specifications

3D Laser system for large diameter pipes measurement MRT1420-RF1420TB

Parameter Value
Type of measurements Diameter, roundness, warping of the pipe, length of the pipe.
Number of measurement points of the pipe profile
(in transverse profile)
Up to 24 000 (the entire pipe profile is to be measured using 2D laser scanners),
number of scanners: 24.
Method of measurement
- Profile
laser triangulation 
Measurements frequency
- Diameter, roundness
- Pipe profile
Up to 250 Hz 
Measurements accuracy
- Outer diameter
- Inside diameter
- Total straightness (pipe warping)
- Deviation from pipe ends straightness on the basis of 1 m

- Deviation from theoretical girth

- Pipe ends roundness
- Pipe body roundness
- Bevel angle
- Thickness of the pipe wall
- Pipe cutting edge
- Bevel dulling
- Welded edges displacement
- Deviation from theoretical girth
- Weld height
- Weld width

Not worse than ± 0,15 mm
Not worse than ± 0,15 mm

Not worse than ± 1 mm

Not worse than ± 0,1 mm

Not worse than ± 0,3 mm
Not worse than ± 0,3 mm
Not worse than ± 0,3 mm
Not worse than ±0,5˚
Not worse than ± 0,1 mm
Not worse than ± 0,15 mm
Not worse than ± 0,15 mm
Not worse than ± 0,1 mm
Not worse than ± 0,1 mm
Not worse than ± 0,3 m
Test speed, m/s Up to 1,5
Uncontrolled zones in the beginning and end of the pipe at a speed of 1 m/s
- Diameter, roundness
not more than 10 mm
Operation

The work of the system is based on the principle of 3D laser scanning of object/ objects with subsequent construction of a 3D computer model and determination of geometrical parameters from the model.

24 pcs of special RFMR625 laser scanners are placed around the moving pipe let to get full 3D model and calculate diameter and roundness.


10 pcs of special RFMR625 laser scanners are placed along the moving pipe let to calculate pipe curvature.

Video

3D Laser system for large diameter pipes measurement

Search

 

Site sections

More links

© 2001 – 2020 RIFTEK LLC

Logoisky tract, 22, Minsk, Republic of Belarus
TIN 100051163

Tel/fax:  +375 (17) 357-36-57

Mobile:   +375 (29) 655-72-55

E-mail: info@riftek.com

Our partners in other countries

  • Country*:
  • Name*:
  • Company*:
  • E-mail*:
  • Confirm your e-mail*:
  • Phone number:
  • Message*:

* - Required

Send